Tips

• For optimal results, it is advisable to carry out a test before starting work.
• When using DEMOSOL with highly absorbent materials like concrete, the holes should be dampened before the mortar is poured, making sure however, that there is no presence of water.
• Large diameter holes positioned closer together accelerate breaking times.
• Make sure the holes are clean and no water and residues are left in the holes, use a high-pressure air hose to clean out.
• Fresh mortar should be poured into holes within 5 minutes after mixing.
• Do not mix more than 2 bags (10 kg) for each lot at a time.
• The feeding depth should be 100% of the pre-drilled holes.
• Do not plug the holes after filling. Cover them only in the event of rain by a waterproof sheet for the first 30 minutes after filling.
• To guarantee the maximum expansive stress of all holes occurring at the same time. The assigned workers have to be synchronized in their operations in mixing, filling and stirring, especially with hard stone.
• DEMOSOL can only be used in holes. It will not work in existing cracks of stones or concretes.
• Never fill glass or metal containers with DEMOSOL mixture, or any container which widens towards the bottom. The pressure will cause the container to shatter.

If the mixed DEMOSOL begins to steam in the mixing container, add some water to dilute and dispose to an open surface.