PREPARATION

Demolition agent;
Clean and cold water;
Plastic or metal bucket;
Beater or wooden rod for mixing;
Safety goggles;
Rubber gloves;

Dust-proof mask (Recommended);
Helmet (Recommended);
Thermometer (Recommended)

MIXING MORTAR

DEMOSOL is a powder that must be thoroughly mixed with clean and cold water before use. In a ratio of 30% of the overall weight, please put the required volume of water 1.5 -1.7 liters into a container, then gradually add one bag of 5 kg of DEMOSOL powder into water and stir all the time to obtain a smooth, lump-free slurry. If mixing has to be made by hand, rubber gloves are required to wear. Longer mixing time increases likelihood of blowout shoot.

FILLING HOLES

For vertical holes, pour DEMOSOL mixed with water into hole directly. Tamp the mortar filled into the holes by a slightly smaller stamp stem. To very long holes, tamp the mortar section by section. For horizontal and slant holes, insert a slightly smaller plastic pipe into the hole, and then fill the expansive mortar into the pipe slowly, withdrawing the pipe from the hole simultaneously.